ProMate II
Processors
The ProMate II is
a series of high performance tabletop color and black and white
print processors. Possessing many features of larger, more
costly floor model designs, the ProMate II is compact in design
and economically priced.
Economical
The ProMate II
offers these energy saving features:
- Seamless
one-piece thermoplastic tanks reduce condensation and heat
loss from tempered chemicals. Less power is required to
maintain accurate chemical temperatures.
- Tempered water
is not required in the stand-by mode.
- Dryer, water,
and transport system start automatically and turn off when
not required.
Computer
Precision and Control
With computer
precision, the ProMate II automatically controls temperature,
development times, and replenishment rates, assuring a high
degree of processing accuracy. Chemical temperatures can be
programmed to within 1/10 th of a degree F, development times
can be programmed to the second, and replenishment rates can be
adjusted to the milliliter. Processing parameters are
continuously checked, adjusted and re-checked by the computer,
maintaining process control with unmatched precision.
Keyboard
Controls
The ProMate II keyboard is designed for easy data entry. You can
easily switch from processing color prints to Duratrans(tm). A
32-character alpha-numeric display instantly verifies operator
input and processor status. Audible signals will alert the
operator of processor status, and any processing parameters that
may be out of tolerance.
Modular
Tanks and transports
are modular in design, reducing the chance of obsolescence when
processing specifications change.
Standard
Features
Advanced
Replenishment System
Infrared sensors on the feed table of the ProMate II detect
material entering the processor. The computer constantly
monitors the amount of material being processed, and activates
metering pumps for the proper amount of replenishment.
Seamless Tanks
The ProMate II’s deep tank design reduces chemical surface
area, minimizing chemical oxidation rates. Kreonite tanks are
warranted for 10 years. Reliable Transport System
The ProMate II is designed with Kreonite’s proven socked
roller transport system. This design uses a “soft against
hard” roller design which provides uniform agitation and an
efficient squeegee action. Kreonite transports require little
maintenance and snap-in retainer clips simplify disassembly for
cleaning. This transport system has been in use worldwide in
thousands of Kreonite processors for over 25 years.
Efficient Dryer
System
The ProMate II dryer
is designed for quiet and efficient operation. The color print
models feature a combination heat and forced air dryer system
assuring consistent and complete drying of prints.
The ProMate II black and white print models feature an infrared
dryer which produces the highest gloss possible on RC
photographic papers. It also enhances the sheen of semi-matte,
silk, and pearl finish papers.
Cost Saving
Features
Providing maximum
energy and water savings, the ProMate II computer monitors
material entering the processor and controls on/off times for
the transport, wash water, and dryer cycle. The wash water rate
can be maintained at the absolute minimum based on the actual
amount of material being processed.
While in the stand-by mode, all unnecessary processor functions
are shut down automatically, saving utility costs and minimizing
wear.
Tempered water is not required to maintain solution temperatures
which further reduces operating costs.
Applications
RA-4 Color
Print:
Materials:
Ektacolor Supra
II, Portra II and Ultra II
RC Papers
Duraflex RA Print Material
Duratrans RA and Duraclear RA
Display Material
Ektamax RA Professional Paper
Chemistry
Ektacolor RA
Ektacolor RA-4NP
Black and
White Print:
Materials:
Chemistry
Designed for
replenishment type developers and fixers.
Not recommended for processes utilizing an activator or for
“stabilization” type chemicals.
NOTE:Listed materials and chemicals are KODAK registered
trademark products. Equivalent products from other
manufacturers may also be used. Contact your Kreonite Dealer
for additional information.
Optional
Accessories
| Water
Control Panel
Includes
flow meter, temperature blender, vacuum breaker,
clean-up spigot, filter, and 24V power suppply.
WPS-A....for all models.
| Roll
Feed & Take-Up Systems
Includes 1 pr. KRFB275 and 1 pr. KRF275 roll flanges
PM2-20RFT.........for
20" models
PM2-31RFT.........for 31" models
PM2-52RFT.........for 52" models
|
| Accessory
Package
Includes
water control panel, spare parts kit, 2ea.
RB10-1 replenishment tanks, one case each of water and
chemical filters.
PM2AP..........for all RA-4 Wash and B/W models
| Roll
Feed Flanges
KRFB100..........1
pr. for 100' rolls, ball bearing
KRFB275..........1 pr. for 275' rolls, ball bearing
|
Accessory
Package-RA-4 Washless
Includes spare parts kit, (3) RB10-1 replenishment
tanks,
and case of chemical filters.
PM2AP-NP........for
all RA-4 Washless Models
| Roll
Take-up Flanges
KRF100............1
pr. for 100' rolls
KRF275............1 pr. for 275' rolls
|
Customer
Spare Parts Kit
Includes a variety of standard replacement parts.
PM2-CSP..........for
all models
| Transport
Carrier Trays
KTCS...............Portable
stand for KTCT-20, -31, and -52
KTCT-20..........for 20" models
KTCT-31..........for 31" models
KTCT-52..........for 52" models
|
| Boost-Buck
Transformer
Due to
CE regulations, the BBT is no longer available through
Kreonite. Check with local electrical contractor if
voltage to processor requires adjustment.
Portable
Chemical Mixers
MPM5-75.........5
gallon capacity, 115 volts
MPM10-75.......12 1/2 gallon capacity, 115 volts
| Water
Filter Kits
KHWF.............Hot
Water Filter Kit
KCWF.............Cold Water Filter Kit
|
| Replenishment
Tanks
RB5...............5
gallon capacity
RB10-1...........10 gallon capacity, portable
| Filter
Cartridges
FCS...............Chemical
Filter Cart. (case of 30)
FCW..............Water Filter Cart. (case of 30)
FCCS.............Carbon Filter Cart. (case of 10)
|
|
